WG2USB converter is designed for embedding into products manufactured by the third-parties; Designed with 1 port for taking up to Wiegand sources using Wiegand 26 or Wiegand 37 bit format and converting it to an USB interface (virtual serial port data stream at 9600 Baud); Automatically distinguish wiegand format; 1 Wegand input ports 1 USB output ports; DC operation: 7V~24V DC; Supports Wiegand 26 bit format and Wiegand 37 bit format; Outputs hexadecimal ASCII characters at 9600 Baud; Size: 49 x 45mm; With 4 mounting holes
WG2RS232 converter is designed for embedding into products manufactured by third-parties this converter is designed with 2 ports for taking up to 2 Wiegand sources using Wiegand 26 or Wiegand 37 bit format and converting it to a RS232 data stream at 9600 Baud features: • Automatically distinguish wiegand format • Two separated wiegand input ports. • Two RS232 output ports. • DC operation from 7 V – 24V DC • Wiegand 26 bit format Wiegand 37 bit format (*1) • Outputs hexadecimal ASCII characters at 9600 Baud. • Small unit size of 49 x 45mm • 4 mounting holes
Color: Black - Material: Oxygen-free copper - Convert main board 20pin to 2 x USB 3.0 port - Cable length: 20cm
Convert the latest NGFF interface into 2 USB 3.0 19-pin interfaces; There are 2 mounting holes on the board (22 x 60mm / 22 x 80mm).
With the popularity of USB3.0 more and more motherboard will provide USB3.0 interface for 20pin. You can use this adapter with 20pin interface board for 2 USB3.0 interface and use for all of USB3.0 device. WBTUO USB3.0 uses the environmental protection material has good electrical conductivity strong anti-interference ability and stable high speed data transmission.